If you don't get an e-mail with your access data, please make sure that you have already registered with us. As soon as you are registered, you can login with your e-mail address and your password.
In case you still have problems logging in, please turn to us by e-mail: firstname.lastname@example.org
We deliver ready for use pipe spirals including high-pressure connections according to your drawings or samples.
The minimum bending radius should not be less than 5 times the tubing diameter, otherwise the life will be decreased.
The maximum tubing length is determined by the production volumes of 6-7 m, other lengths are available on request.
Please select the required size based on operating pressure and orifice (notes on here).
To increase the life and fatigue resistance, we offer to autofrettage high-pressure tubings and high-pressure components. This is particularly recommended for severe or frequent pressure variations. The autofrettage always includes high-pressure connections.
Important: High-pressure tubing loses significantly in strength when heating over 600 ° C and must therefore neither be bent nor welded or soldered.
An der Bahn 10
+49 40 3999707 - 0
+49 40 3999707 - 66